Advertisement
Disabling an access code
1
Push the blue poll worker button at the
back of the Touch Writer.
2
Enter the Poll Worker Code.
3
Select Deactivate
an access code.
4
Check the Access Code status and follow
local procedure to determine if a new
code should be issued:
•
Assigned and Open: access code can be deactivated
and a new access code may be issued following local
procedures.
•
Expired: access code can no longer be used, but
a new access code may be issued following local
procedures.
•
Assigned and Cast: access code was used to cast a
ballot; a new access code should not be issued.
X
27
Advertisement
