Download Print this page

Appendix: Specifications - Tyco Visonic TOWER-30AMPG2 Installation Instructions Manual

Wireless powerg high-security mirror detector withanti-masking

Advertisement

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be
verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures:
Re-orient or re-locate the receiving antenna.
l
Increase the distance between the device and the receiver.
l
Connect the device to an outlet on a circuit different from the one that supplies power to the receiver.
l
Consult the dealer or an experienced radio/TV technician.
l
Warning! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This device complies with FCC Rules Part 15 and with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired
operation.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux
deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are discarding this product and not returning it for repair then
you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste.
Directive 2012/19/EC Waste Electrical and Electronic Equipment.

7. APPENDIX: SPECIFICATIONS

GENERAL
Detector Type
Dual element low-noise pyroelectric sensor
Mirror Data
No. of Beam Elements:
18x3=54 far parabolic mirror segments
Note: Window material is High Density Polyethylene (HDPE). The window is part of the Enclosure Cover (Item 1).
Max. Coverage
15 m (49 ft) / 90°
A. Horizontal view
B. Vertical view
Figure 4. Coverage Pattern & Walk-test
Pet Immunity (only)
Up to 40 kg (90 lb)
ELECTRICAL
Power Supply
Type C
Internal Battery
3V Lithium battery, type CR-123A or equivalent (optionally can be used type CR17450)
Notes:
1. Use only the above battery type.
2. For UL installations use Gold Peak (GP) CR123A only.
Nominal Battery
1450 mA/h ( 2400mA/h for optional CR17450)
Capacity
Low Battery
2.45 V
Threshold
Battery Life (for
6.5 years
typical use)
FUNCTIONAL
True Motion Event
2 remote selections - 1 (OFF) or 2 (ON) motion events
Verification
Alarm Period
2 seconds
D-303372 TOWER-30AM PG2 / TOWER-30AM K9-90 PG2 Installation Instructions
5

Advertisement

loading

This manual is also suitable for:

Visonic tower-30amk9-90pg2