Brake/Tail Light; Replacing A Turn Signal Light Bulb - Yamaha XSR900 2019 Owner's Manual

UBAEE0E0.book Page 34 Tuesday, December 10, 2019 2:42 PM
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the headlight unit.
Periodic maintenance and adjustment

Brake/tail light

This model is equipped with an LED-
type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
1
7-34
EAU70540
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU24205
1
7