Yamaha XSR900 2019 Owner's Manual page 27

UBAEE0E0.book Page 9 Tuesday, December 10, 2019 2:42 PM
The tripmeters "TRIP" show the dis-
tance traveled since they were last re-
set.
To reset a tripmeter, select it by push-
ing the bottom set button. The tripme-
ter will flash for a few seconds. While
the tripmeter is flashing, push the top
set button for one second.
TIP
The odometer will lock at 999999.
The tripmeters will reset and con-
tinue counting after 9999.9 is
reached.
Changing the display item
Push the bottom set button to switch
the display between odometer "ODO",
tripmeters "TRIP 1" and "TRIP 2", in-
stantaneous fuel consumption "km/L"
or "L/100 km", average fuel consump-
tion "AVE_ _._ km/L" or "AVE_ _._
L/100 km", coolant temperature "_ _
°C", ambient temperature "Air_ _ °C",
and clock "_ _:_ _" in the following or-
der:
Instrument and control functions
ODO → TRIP 1 → TRIP 2 → (TRIP F) →
km/L or L/100 km → AVE_ _._ km/L or
AVE_ _._ L/100 km → _ _ °C → Air_ _
°C → Clock _ _ :_ _ → ODO
When using miles:
ODO → TRIP 1 → TRIP 2 → (TRIP F) →
MPG → AVE_ _._ MPG → _ _ °C → Air_
_ °C → Clock _ _ :_ _ → ODO
TIP
Push the top set button to switch
the display in the reverse order.
The fuel reserve tripmeter "TRIP
F" appears only when low on fuel.
When low on fuel, the display automat-
ically changes to "TRIP F" and starts
counting the distance traveled from
that point.
If you do not reset the fuel reserve trip-
meter manually, after refueling and
traveling 5 km (3 mi) it resets automat-
ically and disappears from the display.
4-9
Instantaneous fuel consumption
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km"; or when using miles, to
"MPG" as well.
"km/L": The distance that can be
traveled on 1.0 L of fuel under cur-
rent riding conditions.
"L/100 km": The amount of fuel
necessary to travel 100 km under
current riding conditions.
"MPG": The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der current riding conditions.
To switch the instantaneous fuel con-
sumption display settings, push the
bottom set button for two seconds.
4
1