Yamaha XSR900 2019 Owner's Manual page 29

UBAEE0E0.book Page 11 Tuesday, December 10, 2019 2:42 PM
Air temperature
1. Air temperature display
This display shows the air temperature
from –9 °C to 99 °C in 1 °C increments.
The temperature displayed may vary
from the actual ambient temperature.
TIP
When the air temperature is below
–9 °C, "Lo" will be displayed.
The accuracy of the temperature
reading may be affected when rid-
ing slowly (under 20 km/h [12
mi/h]) or when stopped at traffic
signals, railroad crossings, etc.
Instrument and control functions
Clock
1
1. Clock
The clock uses a 12-hour time system.
When the vehicle is turned off, the
clock can be viewed by pushing the
bottom set button.
To set the clock
1. Turn the main switch on.
2. Switch the display to the clock.
3. Push the bottom set button and
top set button together for two
seconds and the hour digits will
start flashing.
4. Push the top set button to set the
hours.
5. Push the bottom set button and
the minute digits will start flashing.
4-11
6. Push the top set button to set the
minutes.
7. Push the bottom set button to
confirm settings and start the
clock.
TIP
When setting the hours and minutes,
push the top set button briefly to in-
crease the increment value one by one,
1
or push and hold the button to increase
the increment value continuously.
Brightness control
1. Brightness level display
The brightness level of the multi-func-
tion meter unit panel can be adjusted
to six brightness level settings.
4
1