Roverpet H3 Cat Bed Assembly Instructions

Three level cat bed

Table of Contents

Download this manual

Roverpet

20 Kiji Dava Circle Prescott, Arizona 86301

Roverpet Three Level Cat Bed #H3 Assembly Instructions

Thank you for purchasing your new Roverpet model #H3. These instructions will explain how to assemble this

Roverpet Three Level Cat Bed.

STEP1: Includes:

(3) sheepskin furry pads

(2) long cross bars

STEP 2:

Insert two short cross bars into the pre drilled holes of one leg.

STEP 3:

Slide the #CSR-12 cat scratch roller over one of the cross bars that

you have attached to the arm.

STEP 4:

Insert the cross bars into the other leg.

800-658-5925

rover@roverpet.com

(2) Legs

(2) Arms

(4) short cross bars

(4) PVC Uprights

(2) #CSR-12 cat scratch rollers

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the H3 Cat Bed and is the answer not in the manual?

Page 1 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 rover@roverpet.com Roverpet Three Level Cat Bed #H3 Assembly Instructions Thank you for purchasing your new Roverpet model #H3. These instructions will explain how to assemble this Roverpet Three Level Cat Bed. STEP1: Includes: (3) sheepskin furry pads...
Page 2 Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 rover@roverpet.com STEP 5: Install pad over both legs by sliding the connector rings over the legs, with the pad facing upwards. STEP 6: Install the four uprights into the leg sockets.
Page 3 Position all connector rings to rest firmly on cross bars. To reduce the squeaking/friction caused by product on product place a thin layer of Vaseline on the connection points. Congratulations, you are now ready to use your Roverpet #H3 Three Level Cat Bed! Property of Roverpet www.roverpet.com...