Roverpet H3-CPC Assembly Instructions

Roverpet cat play center

Table of Contents

Download this manual

Roverpet

20 Kiji Dava Circle Prescott, Arizona 86301

Roverpet Cat Play Center #H3-CPC Assembly Instructions

Thank you for purchasing your new Roverpet model #H3-CPC.

These instructions will explain how to assemble the Cat Play Center.

STEP1: Roverpet #H3-CPC Cat Play Center includes:

(1) Play Center Module

(2) Long PVC Legs

(4) PVC Uprights

NOTE: This unit is assembled UPSIDE-DOWN

If desired, to reduce the squeaking/friction caused by product on product place a thin layer of Vaseline on the

connection points.

STEP 2: Install the Roverpet Cat Play Center Module's connector rings over both ends of one Short PVC Arm.

Install the Roverpet Cat Play Center Module with the furry side of the pads FACING DOWN, as well as,

making sure the crossbar holes are facing toward the Module.

STEP 3: Insert both Long Crossbars into the crossbar holes of an Arm.

Note: When installing the Crossbars, be sure to install them in between the Module's two connector

rings

(2) Short PVC Arms

(2) Long Crossbars

1-800-658-5925

rover@roverpet.com

(4) Short Crossbars

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the H3-CPC and is the answer not in the manual?

Page 1 STEP 2: Install the Roverpet Cat Play Center Module’s connector rings over both ends of one Short PVC Arm. Install the Roverpet Cat Play Center Module with the furry side of the pads FACING DOWN, as well as, making sure the crossbar holes are facing toward the Module.
Page 2 Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 1-800-658-5925 rover@roverpet.com STEP 4: Install the second Short PVC Arm using the same method as in Step 2 and 3. Make certain the Crossbars are seated completely into the Arms. STEP 5: With the Module still upside-down, install the 4 PVC Uprights into the legs of the Arms, making sure that all the connector rings are still positioned over the Arm legs.
Page 3 STEP 12: Flip the assembled unit over to be right side up, and slide all the connector rings down into position. All the connector rings should be resting ON THE TOP side of the installed crossbars. Congratulations, kitty is now ready to use their Roverpet #H3-CPC Cat Play Center! Property of Roverpet www.roverpet.com...