Removing The Clamp Brackets; Disassembling The Swivel Bracket; Assembling The Swivel Bracket - Yamaha F25C Service Manual

Removing the clamp brackets

1. Remove the tilt pin, and then remove the
clamp bracket bolt, clamp bracket nut,
and collar.
2. Remove the tilt stopper plate nuts and tilt
stopper plate bolts.
3. Remove the cap nuts, then the self-lock-
ing nuts and plate.
4. Remove the through tube, then disas-
semble the clamp brackets.
5. Remove the pins, tilt stopper plates, and
bushings.

Disassembling the swivel bracket

1. Remove the tilt lock lever, tilt lever
spring, tilt lock rod, pin, and tilt support
bar.
2. Remove the bushings and collar.
3. Remove the pin 1, pin 2, collar, tilt lock
plates, tilt lock arm, and springs.

Assembling the swivel bracket

1. Install the tilt lock arm 1, tilt lock plates
2, pin 2 3, pin 1 4, collar 5, springs 6
to the swivel bracket 7.
2. Install the bushings 8 and 9 and collar
0 to the swivel bracket.
6D55F11
Clamp brackets, swivel bracket
3. Install the tilt support bar A and pin B,
and then insert the tilt lock lever C par-
tially into the swivel bracket.
4. Hook the tilt lock rod D onto the tilt lever
E and the pin 2 3, hook the spring F
onto the tilt lever E and the tilt support
bar A, and then insert the tilt lock lever
C into the tilt lever E completely.
1
2
3
4
5
6
7
8
9
7-16