Yamaha F25C Service Manual page 111

10. Install the flywheel magnet.
CAUTION:
Apply force in the direction of the arrows
shown to prevent the flywheel holder from
slipping off easily.
NOTE:
Apply engine oil to the flywheel magnet nut
before installation.
Flywheel holder: 90890-06522
Flywheel magnet nut:
157 N·m (15.7 kgf·m, 115.8 ft·lb)
11. Install the starter pulley, and then tighten
the bolts to the specified torque.
Universal clutch holder:
90890-04086
Starter pulley bolt:
25 N·m (2.5 kgf·m, 18.4 ft·lb)
6D55F11
12. Install all parts removed during disas-
sembly.
Cylinder block
1
2
3
4
5
6
7
8
9
5-50