CHK
ADJ
General
Checking the anodes
1. Check the anodes for scales, grease, or
oil. Clean if necessary.
CAUTION:
Do not oil, grease, or paint the anodes,
otherwise they will be ineffective.
2. Replace
the
anodes
eroded.
Lubricating the outboard motor
1. Apply water resistant grease to the areas
shown.
A
3-13
Periodic checks and adjustments
S6D53240
if
excessively
S6D53260
3
È
È Tiller handle model
NOTE:
Apply grease to the grease nipples until it
flows from the bushings a.
2. Apply corrosion resistant grease to the
area shown.
A
S6D53290
6D55F11