POWR
5. Pull the manual starter handle several
times to check that the sheave drum
turns smoothly and to check the starter
rope for slack. Repeat steps 2–4 if nec-
essary.
NOTE:
When checking the manual starter operation,
pull the manual starter handle while pushing
the start-in-gear protection lock cam so that it
contacts the sheave drum.
6. Pull the manual starter handle to extend
the starter rope completely, then mea-
sure the starter rope length. Adjust if the
starter rope length is out of specification.
Starter rope length (reference data):
1,470 mm (57.9 in)
Removing the timing belt and
sprockets
1. Remove the manual starter.
2. Turn the flywheel magnet clockwise and
align the " " mark a on the driven
sprocket with the " " mark b on the cyl-
inder head.
5-15
Power unit
S6D55B10
3. Remove the starter pulley 1.
Universal clutch holder:
90890-04086
4. Loosen the flywheel magnet nut.
6D55F11