LOWR
Removing the lower unit
1. Drain the gear oil.
2. Shift the remote control lever or shift
lever to neutral, place a block of wood
between the anti-cavitation plate and
propeller to keep the propeller from turn-
ing, and then remove the propeller nut
and propeller.
WARNING
• Do not hold the propeller with your
hands when loosening or tightening it.
• Be sure to remove the clip from the
engine stop lanyard switch.
• Put a block of wood between the anti-
cavitation plate and propeller to keep
the propeller from turning.
3. Remove the anode 1 and trim tab 2.
NOTE:
Note the trim tab position.
6-7
Lower unit
4. Loosen the locknut 3, and then remove
the adjusting nut 4.
5. Loosen the bolts 5, and then remove the
lower unit from the upper case.
Removing the water pump
1. Remove the water pump assembly.
È S-transom model
É L-transom model
6D55F11