Fisher & Paykel DE8060P Installation Manual/User Manual page 39

Condensing dryer
Table of Contents

Advertisement

PROBLEM
Dryer is not
draining.
Clothes getting too
hot or damaged.
Dryer is beeping,
displaying
unfamiliar light
patterns and/ or
a message on the
digital display.
Small puddle of
water coming from
under the machine.
TROUBLESHOOTING
POSSIBLE CAUSES
Drain hose not connected
to the water tank.
Water tank not in
place correctly.
Drain hose or drain blocked
or damaged.
Cycle selected not
appropriated for the load.
Items removed from dryer
before the end of cycle cool
down had finished.
Dryer is experiencing a fault.
Water tank not correctly
in place.
Water tank may need to
be emptied.
Water tank may be damaged.
Drain hose may not be
attached properly at the
machine end.
Drain hose could be damaged.
Drain hose has slipped out of
the drain.
Drain may be blocked.
Dryer door not closing
properly, affecting the seal.
WHAT TO DO
Ensure the drain hose is connected
correctly. Refer to 'Draining'.
Ensure water tank is properly in place.
Check drain hose (if connected) and
drain for blockages or damage.
Ensure the cycle selected is
appropriate for items in the load. Refer
to pages 'Drying cycles'.
Removing items before cool down may
damage clothing if it is not spread
out and exposed to air to cool once
removed from the dryer.
Try turning the dryer off and waiting
1 minute before turning it back on.
Refer to 'Before you call for service'
and 'Fault codes'.
Ensure the water tank is correctly
in place.
Empty the water tank.
Check the water tank for any signs
of damage.
Ensure the drain hose is attached
properly. Refer to 'Draining'.
Check the drain hose for damage.
Ensure the drain hose is securely fixed
in place. Sometimes drain hoses can
move or get displaced, which may lead
to water draining onto the floor.
Check the drain for any blockages.
Ensure the dryer door is closed
properly and there is nothing
obstructing the door opening.
39

Advertisement

Table of Contents
loading

Table of Contents