Fisher & Paykel DE8060P Installation Manual/User Manual page 12

Draining
The dryer is equipped with a condenser unit which accumulates water during the
drying cycle. This water is collected in the removable water tank located at the top left of
the dryer. The accumulated water must be emptied after each drying cycle or you can set
up your dryer to drain automatically using the drain hose provided.
We recommend the dryer is set up to drain automatically where possible especially when
drying full loads, this will avoid having to empty the water tank during a drying cycle.
Connecting the drain hose
1
2
3
12
INSTALLATION INSTRUCTIONS
Remove the black hose from the connection
at the back of the dryer and place it on the
other connection to the left.
Uncoil the white drain hose and connect it to
the back of the dryer where the black drain
hose was previously connected.
Place the other end of the white drain hose
into a tub or standpipe. The connection
between the dryer and the white drain hose
must be secured to avoid a potential flood.