Fisher & Paykel DE8060P2 Option Manual

Drying cycle options

All drying cycles default to the recommended options for that cycle based on
the average expected load to be dried using that cycle. You can vary the options (eg 'Dryness Level', 'Dry Temp') to
create your desired cycle. Note: some options are not available on some cycles, for clothes care reasons, or because
the option is not appropriate for the cycle.
To change a drying option or options you have selected after a cycle has started, touch
and select your new setting, then touch
again to resume the cycle with the new setting or settings.
Some options may not be available for selection under certain conditions and after
particular stages of the drying cycle have passed.

Dryness Level

Your dryer takes the guess work out of choosing drying times by
sensing the dryness of the load. When your dryer senses that the
clothes have dried to the dryness level you have selected, the
dryer will automatically finish the cycle.
The dryer has five dryness levels from Damp through to Extra
Dry. Choose the dryness level to suit your load depending on
how dry you wish for your clothes to be. If you find the load is not
dry enough, select the next dryness level up. The higher the
level, the longer the drying time and the drier your clothes will
become.
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Condensing/DE8060P2/User_Guide_DE8060P2/07_Drying_cycle_options
Dryness levels
Updated: Mon, 10 Apr 2023 02:25:03 GMT
Powered by
1