Pycom WiPy 3.0 Manual page 98

1.4.3.2 The Things Network
These are unique to each gateway, location and country specific frequency. Please verify
that correct settings are selected otherwise the gateway will not connect to TTN.
You need to tick the "I'm using the legacy packet forwarder" to enable the right
settings. This is because the Nano-Gateway uses the 'de facto' standard Semtech UDP
protocol.
Option
Protocol
Gateway EUI
Description
Frequency Plan
Location
Antenna Placement
Most LoRaWAN network servers expect a Gateway ID in the form of a unique 64-bit
hexadecimal number (called a EUI-64). The recommended practice is to produce this ID
from your board by expanding the WiFi MAC address (a 48-bit number, called MAC-48). You
can obtain that by running this code prior to configuration:
Packet Forwarder
User Defined (must match
User Defined
Select Country (e.g. EU - 868 MHz)
User Defined
Indoor or Outdoor
Value
)
config.py
98