Pycom WiPy 3.0 Manual page 35

1.1.1 SiPy
In order to access the SiPy via WiFi you only need to provide
pin of the SiPy:
Vin
By default, when the SiPy boots, it will create a WiFi access point with the following
credentials:
SSID:
sipy-wlan
password:
www.pycom.io
Once connected to this network you will be able to access the telnet and FTP
servers running on the SiPy. For both of these the login details are:
username:
micro
password:
python
Antennas
Sigfox
If you intend on using the Sigfox connectivity of the SiPy you must connect a Sigfox
antenna to your SiPy before trying to use Sigfox otherwise you risk damaging the
device.
Firstly you will need to connect the U.FL to SMA pig tail to the SiPy using the U.FL
- on the
3.5v 5.5v
35