Table of Contents
Advertisement
1.1.1 WiPy
Locate the USB connector on the expansion board.
Insert the WiPy module on the Expansion Board with the reset button pointing towards
the USB connector. It should firmly click into place and the pins should now no longer
be visible.
Before connecting your module to a Pysense/Pytrack/Pyscan board, you should update
the firmware on the Pysense/Pytrack/Pyscan. Instructions on how to do this can be
found here.
Look for the reset button on the WiPy module (located at a corner of the board, next to
the LED).
Locate the USB connector on the Pysense/Pytrack/Pyscan.
Insert the module on the Pysense/Pytrack/Pyscan with the reset button pointing towards
the USB connector. It should firmly click into place and the pins should now no longer
be visible.
52
Advertisement
Table of Contents
Need help?
Do you have a question about the WiPy 3.0 and is the answer not in the manual?
Questions and answers