Table of Contents
Advertisement
1.2.1 Drivers
Drivers
Linux
You should not need to install any drivers for our devices to be recognised by Linux. You
may how ever need to adjust permissions to make sure you have access to the serial port.
On most distributions this can be done by adding your user to the
user group.
dialout
Please check the specific instructions for your linux distribution for how to do this.
macOS
On macOS you shouldn't need to do anything special to get our device to work.
Windows
All our products will work out of the box for Windows 8/10/+. If using Windows 7, drivers to
support the Pysense/Pytrack/Pyscan/Expansion Board 3.0 boards will need to be installed.
Download
Please download the driver software from the link below.
Pysense/Pytrack/Pyscan/Expansion Board 3.0 Serial Driver
Installation
First navigate open the Windows start menu and search/navigate to `Device Manager. You
should see your Pytrack/Pysense in the dropdown under other devices.
57
Advertisement
Table of Contents
Need help?
Do you have a question about the WiPy 3.0 and is the answer not in the manual?
Questions and answers