Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Step 1:
• If assembling a Hardwood top that has a depth greater than 36",
top will be in 2 pieces (.5" undersized on length). Place both top
halves face down on a protected flat surface. Align together the
dog bone holes on both tops.
Step 2:
• Adjust Tite joint fastener to the size of the field joint opening
and then place the fastener into each opening. Using a 7/16"
wrench, tighten each fastener so that both tops are securely
clamped together.
Step 3:
• Place LOBO frame tabs down on top of the LOBO top and align
with pre-drilled pilot holes.
Step 4:
• Starting at one corner, place the 5/16" bolt that is welded to leg
through corner support brace of frame.
Step 5:
• Using a # S2 square bit, secure the leg plate to the tabletop with
#10 x 3/4" square pan screws. Repeat for each leg plate.
Step 6:
• Place the 5/16" lock washer and 5/16" hex nut onto the leg bolt and
tighten with 1/2" wrench. Repeat
Step 7:
• Using a # S2 square bit, secure frame to table top with #10 x 3/4"
Square pan screws. One screw per tab.
Step 8:
• With someone's help, turn table upright.
To o l s R e q u i r e d
• 1/2" Wrench
• 7/16" Wrench
• Screw gun
• # S2 Square bit
wibenchmfg.com
Steps 4 & 5
on remaining legs.
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
2
Step
Shown with
optional gussets
7
Step
Shown with optional gussets
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
LOBO Tables
2 Piece Butcherblock Top
4
Step
Step
5
6
Step
1