Advertisement
Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Step 1:
• Make sure that legs are fully installed and adjusted to the correct
height.
Step 2:
• Place gusset in corner where leg and frame meet. Use a rubber
mallet to tap the #10 self-drilling screws into place.
Step 3:
• Using a screw gun along with a 5/16" hex bit to finish fastening the
gussets to the leg and frame with the #10 self-drilling screws.
Step 4:
• Repeat for remaining gussets.
To o l s R e q u i r e d
• Screw Gun
• 5/16" Hex Bit
• Rubber Mallet
Gussets are NOT available on shaped tables excluding the Round ones.
04009742
04066920
04009742
04066918
wibenchmfg.com
images are for illustrative purposes only and may
Part Identifier Key
Gussets w/ Hardware Pack (04066920)
Part #
Description
#10 Self-drilling screws
Gusset for square legs
Gussets w/ Hardware Pack (04066918)
Part #
Description
#10 Self-drilling screws
Gusset for square legs
Specifications are subject to change. Product
differ from the actual product.
Used only with square LOBO legs
Qty.
8 per gusset
1 per leg
Used only with round LOBO legs
Qty.
8 per gusset
1 per leg
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
LOBO Tables
w/ Gussets
3
Advertisement
