WB Manufacturing EPIC Assembly Instructions

Step 1:
•
If assembling a hardwood top that has a depth greater than 36", top
will be in 2 pieces (0.5" undersized on length). Place both top halves
face down on a protected flat surface. Align the dog bone holes
together on both tops.
Step 2:
•
Adjust tite joint fastener to the size of the field joint opening and
then place the fastener into each opening. Using a 7/16" wrench,
tighten each fastener so that both tops are securely clamped
together.
Dog bone holes
wibenchmfg.com
Tite joint
fastener
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Before you begin, please make sure all parts and proper
quantities are included. (See Part Identifier Key) Any parts
damaged during shipment must be reported within 24 hours of
receipt. To report information regarding damages or if you have
any questions, please call 800.242.2303.
Qty N/A
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
EPIC Tables
2 Pc Hardwood Tops
To o l s R e q u i r e d
• Screw gun
• # S2 square bit
• 4mm hex bit
• 4mm hex wrench
• 1 1/8" socket wrench
7/16" wrench
Tite joint fastener
V022122 Version subject to change
1