WB Manufacturing Boat Conference Table Assembly Instructions

Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be reported
within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Step 1:
• Place top face down on a protected flat surface.
Step 2:
• Align base with threaded inserts.
• Using a 4mm Allen wrench or 4mm Hex bit, secure table
top with 10-24 x 1" joint connector bolts.
• Repeat this step for each base. (Number of bases are
determined by length of table.)
Step 4:
• With someone's help, turn table upright.
To o l s R e q u i r e d
• Screw gun
• 4mm Allen wrench OR
• 4mm Hex bit
Conference Table Base Options
Part # 5088 or 5092 Part # 3320, 3324 or 4430
DuraCast T-Base
wibenchmfg.com
Part # 7034 or 036
H-Base Tubular TT-Base
Conference Tables
With 5 Different Bases
Boat Conference table shown
with Arch TT-Bases.
Part # 7236
Arch TT-Base
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Part # 1142, 1143 or 1144
Panel Base
V062419 subject to change.
1