Views; Sonar View - Humminbird 787C2 Operation Manual

531476-1_A - 787c2_Eng.qxd 11/22/2005

Views

The views available on your 700 Series™ Fishing System are:
Sonar views:

• Sonar View

• Zoom View
• 200/83 kHz Split Sonar View
• Big Digits View
• Circular Flasher View
• Screen Snapshot View
• Side Beam View
• WideSide® View.
NOTE: When you change any menu settings that affect the sonar, the view will update
immediately (i.e. you don't have to exit the menu to apply the change to the screen).
NOTE: Side Beam View and WideSide® View require the purchase of the QuadraBeam
transducer for the Side Beam View and the WideSide® transducer for the WideSide® View. You
can visit our website at www.humminbird.com to order these accessories online or contact
our Customer Resource Center at 1-800-633-1468.
Sonar View is the default view. When the VIEW key is pressed, the display cycles through
the available views. When the EXIT key is pressed, the display cycles through the
available views in reverse order. Any view can be hidden or displayed as part of the view
rotation using the Views Menu tab.
3:20 AM Page 18
Navigation views:
• Bird's Eye View
• Chart View
• Combo View.
TM
11
Sonar View
Sonar View presents a historical log of sonar returns. Depth is always displayed.
Readouts for temperature and speed are automatically displayed if the appropriate
accessory is connected. The most recent sonar returns are charted on the right side of
the window; as new information is received, the older information is moved across the
display to the left. A Digital Depth Readout is displayed in the upper left corner. A scale
with Upper and Lower Depth Range readouts appears along the right edge of the Sonar
View. The scale indicates the distance from the surface of the water to a depth range
sufficient to show the bottom. Depth Range is automatically selected to keep the
bottom visible on the display, although you can adjust it manually as well (see Sonar
X-Press™ Menu). Six additional Digital Readouts display information from optional-
purchase accessories. These information boxes can be customized to show only the
information desired (see Setup Menu Tab, Select Readouts).
Sonar View
Depth
Temperature
Triplog
Sonar History
Window
Cursor
Dialog Box
NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the
bottom. This usually happens if the water is too deep, the transducer is out of the water, the
boat is moving too fast, or for any other reason that the unit can't accurately receive
continuous data.
12
Upper Depth
Range
RTS® Window
Cursor
Lower Depth
Range