Alarms Menu Tab; Depth Alarm; Fish Id Alarm - Humminbird 787C2 Operation Manual

700 series
Hide thumbs Also See for 787C2:
Table of Contents

Advertisement

531476-1_A - 787c2_Eng.qxd
11/22/2005

Alarms Menu Tab

From any view, press the MENU key twice to access the
Main Menu System. The Alarms tab will be the default
selection.
NOTE: When an alarm is triggered, you can silence it by
pressing any key. The alarm will be silenced, and will not be
triggered again until a new instance of the alarm condition is
detected.
Alarms Menu
3:21 AM
Page 94
87

Depth Alarm

Depth Alarm sounds when the depth becomes equal to
or less than the menu setting.
To change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm
setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only],
Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the Fishing System detects
fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+
For example, if you've set the Fish ID Alarm to sound for Large fish only,
the Fish ID alarm will sound when a large-sized fish is detected.
To change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm
setting. (Off, All, Large/Medium, Large, Default = Off)
Off
Large
Large/Medium
All
88
TM
is on.

Advertisement

Table of Contents
loading

This manual is also suitable for:

700 series

Table of Contents