Cisco IGX 8400 Series Installation And Configuration Manual page 42

Cisco systems hub/switch installation and configuration guide

Hide thumbs Also See for IGX 8400 Series:

Attaching Peripherals

Step 6

D2.cb1

Active IP Address:

IP Subnet Mask:

TCP Service Port:

Default Gateway IP Address:

Maximum LAN Transmit Unit:

Ethernet Address:

Control Socket - Ready

Base Socket Descriptor - 1

Open Socket Descriptor - 2

Last Command: dsplan

Next Command:

3-42 Cisco IGX 8400 Series Installation and Configuration

After the workstation and IGX node interface have been set up, Cisco WAN Manager can

be started. After Cisco WAN Manager has started and the communication sockets are

active, the dsplan screen looks like this:

LAN

cisco IGX 8410

"Sockets" is the BSD UNIX name for connections between processes and

Note

typically applies to network communication.

Note

Before switching on the Cisco WAN Manager workstation, refer to the Cisco WAN

Manager Operations publication.

9.3 Feb. 27 2000 14:27 PST

192.187.207.21

255.255.255.0

5130

192.187.207.1

1500

00.55.43.00.04.55

Table of Contents