tayco Hanna Series Installation Manual page 8

Hanna meeting table with tubular "T" base
2. Position the tubular "T" base
using the pre-drilled positioning
holes and attach it to table top
using #10 X 1" Oval Head Screws,
(Figure 2).
3. Drive four more screws to table
top using #10 X 1" Oval Head
Screws, (Figure 3).
4. Lift the table into an upright
position; level and adjust the
glides if necessary.
FEBRUARY 2020
Drill Robertson # 2
Tools & Hardware Needed
8540-0789
#10 X 1" Oval Head
Screw (8X)
Figure 2
Figure 3
hanna 5