Kenwood CS-6040 Instruction Manual page 49

NOTE: After operation (1) or during correction of the
calendar and clock display, s w i t c h e s and con-
trols on the panel cannot function properly. If
switch or control operation is required, complete
correction.
NOTE: B e w a r e of the following instructions w h e n cor-
recting the calendar and clock display:
© if FEB(ruary) is selected under the condition where
" 3 0 " or " 3 1 " is set in the " D a y " display, it changes
into " 0 1 " .
Example: " F E B " - 3 0 - 8 8
Flashing
(Shift flashing position rightward.)
F E B - " 0 " 1 - 8 8
Flashing (Changed to 0 1 )
© If a 30-day month (APR, J U N , S E P , NOV) is select-
ed under the condition where the second digit of the
" D a y " is set to 3 , the first digit of the " D a y " can-
not be changed and remains 0.
Example: A P R - 3 " 0 " - 8 8
Flashing
(First digit of Day is not changed)
© If a 31-day month ( J A N , M A R , M A Y , J U L , A U G ,
O C T , DEC) is selected under the condition where the
second digit of the " D a y " is set to 3 , the first digit
of the " D a y " is set to 0 and 1 alternately.
Example: J A N - 3 " 0 " - 8 8
Flashing
(Rotation of S W E E P T I M E / D I V control
cannot set other figures
© If the second digit of the " D a y " is set to 0 , its first
digit cannot be set to 0.
© If the " D a y " is set to 31 or more, except for F E B ,
the number is changed into 3 0 automatically.
Example: J A N - " 2 " 5 - 8 8
Flashing
(If second digit of " D a y " is set to 3.)
J A N - 3 " 0 " - 8 8
Flashing (Changed to 3 0 )
© If any impossible time is set, it is changed into " 2 0 " .
Example: " 1 " 8 : 0 0
Flashing
(If second digit of " O ' c l o c k " is set to
" 2 " . )
2 " 0 " : 0 0
Flashing (Changed to 20)
N than 0 and 1.)
49