Table of Contents
Advertisement
AUS
Before starting/Operation
Layout/Scope of delivery
Filling the fuel (Fig. 1)
m WARNING! Fuel has been drained for shipping. Failure to fill fuel tank (12) with
petrol before starting the engine may result in permanent damage and will void
warranty.
m WARNING! Do not overfilll the fuel tank (12).
m WARNING! Do not smoke while re-fueling.
DO NOT USE FUEL WITH ETHANOL MIXTURE.
• Use unleaded petrol with a minimum of Octane 91.
• Use clean, fresh fuel; purchase fuel in quantities that can be used every 30 days,
to prevent gum or foaming inside the container and/or fuel tank (12).
• Remove the fuel tank cap (10).
• Fill with 0.9l petrol.
• Install and secure the fuel tank cap (10) again.
VII. OPERATION
m WARNING! You may not start to operate the machine until you have read these
operating instructions, observed all the instructions given and completely and prop-
erly assembled the machine!
Adjusting the cutting depth (Fig. 7)
The machine has a height adjustment lever (16) with five different height settings to
easily adjust the cutting height.
• To decrease the cutting height pull the height adjustment lever (16) out and move
it up a notch, towards the handlebar.
• To increase the cutting height pull the height adjustment lever (16) out and move it
down a notch, towards the front of the unit.
NOTE: If you are unsure of which cutting height to use, begin with a high setting and
complete a trial cut on a small section of the lawns edge. Readjust if necessary.
10
18
support@scheppach.com.au
aldi.service.uk@scheppach.com
MODEL: LE3200P PRODUCT CODE: 61520 08/2018
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
HTW250/240P
AFTER SALES SUPPORT
AFTER SALES SUPPORT
00800 4003 4003
LE3200P
1300 855 831
Advertisement
Table of Contents
