Table of Contents
Advertisement
AUS
Safety information
Layout/Scope of delivery
- Do not use the machine in a damp or wet environment.
- Delay the work in case of disadvantageous weather (rain, snow, ice, wind) –
increased risk of accidents!
- Provide for good illumination.
- Do not use the machine near inflammable liquids or gases.
• Familiarize yourself with your environment and pay attention to possible dangers
such as wires and power lines. Remember, you may not be able to hear because
of the motor noise.
• Never leave the machine unattended.
• For breaks the machine has to be put down in such a manner that no person will
be endangered. Assure the machine against unauthorised access.
• Persons under the age of 18 must not operate the device.
• Keep other persons away.
• The operator is responsible for accidents or risks which occur to other persons or
their properties.
• The operator is responsible to third persons within the area of operations.
• Keep children away.
• Do not allow other persons, especially children, to touch the machine. Keep them
away from your working area.
• Do not use a blunt, broken or otherwise damaged cutting device.
• Be sure that the cutting device is moving before you start cutting.
• Do not overload the machine! You work better and safer in the given performance
range.
• Only operate the machine with complete and correctly attached safety equipment
and do not alter anything on the machine that could impair the safety.
• Do not modify the device or parts of the device respectively.
• Do not use any blades which do not comply with the indicated characteristics of
this instruction manual.
Safe handling of fuels
Fuels and fuel vapours are flammable and may cause serious injury on the skin or
when inhaled. Therefore be careful and provide sufficient ventilation when handling
with fuels.
• Stop the engine and allow the device to cool down before fuelling it.
• Do not smoke and avoid open flames when fuelling.
• Wear gloves when fuelling.
• Never refuel or drain the tank indoors.
• Avoid spilling of fuel or oil. Clean the machine immediately when you have spilled
10
14
aldi.service.uk@scheppach.com
support@scheppach.com.au
MODEL: HTW250/240P PRODUCT CODE: 64055 xx/2017
MODEL: LE3200P PRODUCT CODE: 61520 08/2018
HTW250/240P
AFTER SALES SUPPORT
AFTER SALES SUPPORT
00800 4003 4003
LE3200P
1300 855 831
Advertisement
Table of Contents
