Table of Contents
Advertisement
IMPORTANT!
This cooktop must be connected to the mains power supply only by a suitably qualified
●
person.
To connect the cooktop to the mains power supply, do not use adapters, reducers, or
●
branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
●
temperature will not exceed 75
o
C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations.
●
Any alterations must only be made by a qualified electrician.
Before connecting the cooktop to the mains power supply check that:
The domestic wiring system is suitable for the power drawn by the cooktop.
●
The voltage corresponds to the value given in the rating plate
●
The power supply cable sections can withstand the load specified on the rating plate.
●
Power supply
CI604ELTB
7400W @ 220-240V 1N - 32A
CI704ELTB
7400W @ 220-240V 1N - 32A
CI904ELTB
7400W @ 220-240V 1N - 32A
!1
FIT CLAMPING BRACKETS BASED ON THE
BENCHTOP THICKNESS
No. of brackets and slot positions depends on model
view from below
12-40mm
!0
CONNECTING THE COOKTOP TO THE MAINS POWER SUPPLY
Fit a minimum of
2 brackets on opposing sides
40mm +
Brown
Unclip
(Live)
and lift up
Blue
(Neutral)
L
CI604ELTB, CI704ELTB1 CI904ELTB
Single-phase connection
220-240V~
!2
SECURE TO BENCHTOP
Secure on at least 2
opposing sides
Repeat on all the other brackets
E
Ensure cable
clamp is tightened
with screw
(you may have
to remove the
Green
screw first
& Yellow
before fitting
(Earth)
the clamp)
9
Advertisement
Table of Contents
