Table of Contents
Advertisement
6
DISCARD PACKAGING
8
APPLY ADHESIVE FOAM TAPE AROUND GLASS EDGE
Ensure edge of tape
lines up with outer
edge of cooktop
8
Recycle responsibly
Foam Tape
1 Apply the foam seal around the glass
overhang, 5 mm in from the edge
of the glass, with the adhesive side
facing down to form a continuous
seal around the cooktop.
2 Using a sharp cutter or trimmer
Adhesive side
knife, trim the excess sealing
material around the edge of the
cooktop. Take care not to damage
the benchtop.
7
PLACE COOKTOP UPSIDE DOWN
IMPORTANT! - To avoid damage to the glass, ensure there is a protective cover underneath it.
9
LOWER GENTLY INTO THE CUTOUT
IMPORTANT!
Beware sharp edges
Advertisement
Table of Contents
