Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Before you install the appliance, please make sure that
a suitable disconnection switch is
●
incorporated in the permanent wiring,
mounted and positioned to comply with
the local wiring rules and regulations.
A means of disconnection with at least
a 3 mm air gap contact separation in
all poles must be incorporated into the
fixed wiring in accordance with the
wiring rules, unless the local wiring rules
allow for alternative means.
the benchtop is made of a heat resistant
●
material.
the power supply cable is not accessible
●
through cupboard doors or drawers.
there is adequate flow of cool air from
●
the cabinetry to the base of the cooktop.
You may ventilate from adjacent
cupboards, but ensure that the available
air supply will not be restricted.
the ventilation area must be at least two
●
50mm diameter holes or of an equivalent
area.
the isolating switch is easily accessible
●
by the customer.
you use heat-resistant and easy-to-clean
●
finishes (such as ceramic tiles) for the
wall surfaces surrounding the cooktop.
the cooktop will not be installed directly
●
above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as
the humidity may damage the cooktop
electronics.
2
1
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
if the cooktop is installed above an oven,
●
the oven has a built-in cooling fan.
the installation will comply with all
●
clearance requirements and applicable
standards and regulations.
you consult local building authorities and
●
by-laws if in doubt regarding installation.
When you install the appliance
We do not recommend you flush mount
●
or seal this appliance into the bench
with silicone or glue. Doing so will make
future servicing difficult. ELBA by Fisher
& Paykel will not be liable for any costs
associated with removing or replacing a
sealed-in appliance, nor for repairing any
damage that may be incurred by doing
this.
Seal exposed bare edges of the cutout
●
with an oil-based paint or moisture-
proof polyurethane to prevent possible
moisture creeping between the cooktop
trim and the benchtop.
Take extreme care not to chip, crack,
●
or break the top glass surfaces during
installation. A heavy metal tool or part
accidentally dropped on the glass could
damage it.
If, after following the instructions given,
●
correct performance cannot be achieved,
please contact your nearest Fisher
& Paykel Authorised Service Centre,
Customer Care, or contact us through
our local website listed at the end of this
document.
Advertisement
Table of Contents
