Installation Instructions; Installation Requirements; Power Supply - Fisher & Paykel CT560X Installation Information

Installation Instructions

Installation requirements

(CT560X models)
If prolonged use is anticipated, or the
cooktop is mounted above a drawer space, a
barrier between is recommended
AND
Where the base of this product is accessible,
a barrier MUST be installed to prevent
contact.
If a barrier is installed below the cooktop,
this barrier must be made of heat resistant
material capable of withstanding sustained
exposure to temperatures up to 70
at least 30 mm and no greater than 75 mm
below the base of the cooktop and have
FOUR ventilation holes (min 50 mm - max
70 mm diameter, see diagram for detail).
These ventilation holes must be open to
free air. It is recommended that the barrier
be removable to allow ease of securing the
cooktop with the supplied clamps.
250 mm
Additional requirements
Ensure that there is a minimum of 60 mm
between the cutout and the rear or side
wall.
If the cutout is less than 100 mm from the
wall, some form of protection against heat
should be used, such as ceramic tiles.
The CT560X models should not be installed
directly above a dishwasher as the humidity
may damage the cooktop/hob electronics.
4
o
C, be
ø50 mm
230 mm
CT560X
Wiring
Connect according to the label on the
underside of the cooktop.
Clamping down the cooktop
This cooktop is supplied with fastening
clamps that will cope with bench thickness
20-50 mm. For benchtops thicker than
50mm, recess the underside to a thickness
of 20-50 mm.
20 mm 50 mm

Power Supply

CT560X
CE901
Recess
5.9kW @ 220-240V (25A)
8.5kW @ 220-240V (37A)