Fisher & Paykel CI302DTB Using Manual
Hide thumbs
Also See for CI302DTB:
- User manual (40 pages) ,
- Installation manual (25 pages) ,
- Installation instructions manual (17 pages)
Related Manuals for Fisher & Paykel CI302DTB
Summary of Contents for Fisher & Paykel CI302DTB
- Page 1 Using your induction cooktop CI302DTB model CI603DTB model CI604DTB model CI754DTB model https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi… Updated: Tue, 26 Jul 2022 06:17:43 GMT Powered by...
- Page 2 CI905DTB2 model CI905DTB3 model Cooking Zone Zone Diameter Power Powerboost Recommended Minimum Pan Size 145 mm 1400 W 2200 W * 120 mm 180 mm 1850 W 3000 W * 145 mm 210 mm 2300 W 3700 W * 145 mm 125 mm (inner zone) 180/260 mm 1850/2600 W...
-
Page 3: Control Panel
Control panel To select a setting on the selector: Touch at one point to “jump” to a specific setting slide your finger along the selector. https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi… Updated: Tue, 26 Jul 2022 06:17:43 GMT Powered by... -
Page 4: To Start Cooking
To start cooking Touch and hold the ON/OFF control for 2 seconds. A white indicator light will glow. will appear in the cooking zone displays. https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi… Updated: Tue, 26 Jul 2022 06:17:43 GMT Powered by... - Page 5 Place a suitable pan on the cooking zone you wish to use. • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. Always place small pans in the centre of the cooking zone.
- Page 6 If a display flashes alternately with the heat setting This means that: • you have not placed a pan on the correct cooking zone or • the pan you’re using is not suitable for induction cooking or • the pan is too small or not properly centred on thecooking zone. No heating takes place unless there is a suitable pan on the cooking zone.
-
Page 7: When You Have Finished Cooking
When you have finished cooking Turn the cooking zone off by touching or sliding down Turn the whole cooktop off by touching the ON/OFF control. Make sure the display shows https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Two_Burners/CI302DTB3/User_Guide_CI302DTB3/04_Usi… Updated: Tue, 26 Jul 2022 06:17:43 GMT Powered by... -
Page 8: Locking The Controls
Beware of hot surfaces will flash in the window of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled down to a safe temperature. Locking the controls •... - Page 9 To lock the controls 1. Make sure that the cooktop is turned on but no cooking zone is in use. 2. Touch and hold the keylock control for 5 seconds. The white indicator light above the control comes on, indicating that the controls are locked. The cooktop will automatically turn off after 20 seconds, but the controls will still be locked when you turn the cooktop on again.