Connecting The Cooktop To The Mains Power Supply - Fisher & Paykel CI302DTB Installation Instructions Manual

11

CONNECTING THE COOKTOP TO THE MAINS POWER SUPPLY

Important!
This cooktop must be connected to the mains power supply only by a suitably qualified person.
To connect the cooktop to the mains power supply, do not use adapters, reducers, or branching devices, as
they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its temperature will
not exceed 75 o C at any point.
Before connecting the cooktop to the mains power supply check that:
the domestic wiring system is suitable for the power drawn by the cooktop.
The voltage corresponds to the value given in the rating plate
The power supply cable sections can withstand the load specified on the rating plate.
Power supply
CI302DTB 3700W@ 220-240V 1N ~ 16A*
CI603DTB 6950W@ 220-240/380-415V 2N ~ 30A
CI604DT 7000W @ 220-240/380-415V 2N ~ 30A
CI754DT 7400W @ 220-240/380-415V 2N ~ 32A
CI905DT 9800W @ 220-240/380-415V 3N ~ 43A
*The CI302DTB comes supplied with a cable. This must be wired into a 16A plug.
Important!
Check with an electrician whether the domestic wiring system is suitable without alterations. Any alterations
must only be made by a qualified electrician.
12 FIT CLAMPING BRACKETS BASED ON THE
BENCHTOP THICKNESS
No. of brackets and slot positions depends on model
view from below
12-40mm
Fit a minimum of
2 brackets on opposing sides
40mm+
Connection diagrams
CI603DTB, CI604DTB, CI754DTB
Single-phase connection
220-240V~
2 4
1 3 5
N PE
L
Single-phase connection
220-240V~
2 4
1 3 5
L N PE
13 SECURE TO BENCHTOP
Two-phase connection
380-415V 2N~
2 4
1 3 5
L L N PE
1 2
CI905DTB
Three-phase connection
380-415V 3N~
2 4
1 3 5
L L L N PE
1 2 3
Secure on at least
2 opposing sides
Repeat on all the other brackets
11