D/n ir cameras 1/3” 420tvl, 520tvl, 550tvl day/night ir cameras (7 pages)
Summary of Contents for Dante DN1126
Page 1
DN1126 1/3” H.264/MPEG4/MJPEG 550TVL Day/Night IP Camera Installation and Operations Manual Model Numbers: DN1125A1, DN1125B1 DN1125A4, DN1125B4 Description: H.264/MPEG4/MJPEG IP Box Camera Dual Configurable Video Streams with duplex Audio, Data, Alarms...
DN1126 provides a high quality video image with a limited bandwidth and storage capacity. It also supports dual stream mode and is equipped with built-in, optional VCA (Video Content Analysis) feature.
2. Product Description Product Specifications DN1126 2.1. Function Specifications Image Sensor: 1/3” SONY Super HAD CCD; SS-HQ1 Chipset Effective Pixels: 768 x 494 (NTSC) / 795 x 596 (PAL) Super High Resolution: 550TVL Minimum Illumination: Color 0.3LUX/F1.2/ 0.002LUX/F1.2 B/W S/N Ratio: >...
3.3. Functions LOOP OUT RESET RS-232 AUDIO Tx Rx C Out In Rear panel view Micro SD ETHERNET Bottom view Figure 2. DN1126...
Page 7
Video Output BNC video output port Reset Switch (Reset) Reset switch is used for restarting DN1126 or resetting DN1126 as Factory Default (FD). Refer to ‘4.1. Factory Default Settings’ for detailed procedures. USB connector USB connector is used for connecting the USB device with DN1126.
Page 8
Figure 7. RS-232C (new RS-422/RS-485) Connection Four (4) pin connector for audio In / Out DN1126 has a mono audio input and a mono audio output. As the output power for the audio is low, amplifier speaker is needed (Do not use a headphone or earphone directly connected into the camera).
Page 9
DN1126 employs a 12VDC power supply. Figure 9. Power Terminal Micro SD Card socket DN1126 features a memory card slot for external storage. LAN Connector (Ethernet) This is a RJ-45 LAN connector for 10/100 Base-T Ethernet. Status LED Network LED Figure 10.
Adaptor for mounting the camera Mounting adapter is provided on the bottom of the camera for mounting the camera on a bracket or tripod. Adapter is designed to accept standard size mounting screws. It may be unfastened and the mounted onto the top side of the camera, depending on User application.
3.5. Serial Number / MAC Address Serial number and MAC address is attached on the bottom of DN1126 as shown in Figure 4. MAC Address 710030FFD MAC 00:13:23:03:0F:FD DN1125 P140101010000 - 14001 Serial Number Figure 4. Serial Number / MAC Address...
4. Operation Description 4.1. Factory Default Settings Factory default settings are set as follows: • IP address: 192.168.xx.yy (refer to 2.3 Serial Number / MAC Address) • Mask: 255.255.0.0 • Gateway: 192.168.0.1 • User ID: root • Password: pass xx yy xx yy MAC address = 00-13-23-01-23-45 →...
5. Power over Ethernet (PoE) The PoE feature employed in DN1126 is available in models DN1126A4 and DN1126B4. The standard units for power via 12VDC are models DN1126A1 and DN1126B1. For the detailed information, please see Data Sheet on Series DN1126 IP Box Cameras.
0.01 2.593 Vp-p Ambient Operating Temperature ºC Ambient Operating Humidity Table 3. Operating conditions 6.2. Power consumption DN1126 Input Voltage 12VDC Current 120-240VAC Consumption 240mA Table 4. Power consumption Overvoltage and overcurrent will cause a severe damage to the device or even...