Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dante DN1125A1
Summary of Contents for Dante DN1125A1
- Page 1 DN1125 1/3” H.264/MPEG4/MJPEG 550TVL Day/Night IP Camera Installation and Operations Manual Model Numbers: DN1125A1, DN1125B1 DN1125A4, DN1125B4 Description: H.264/MPEG4/MJPEG IP Box Camera Dual Configurable Video Streams with duplex Audio, Data, Alarms...
-
Page 2: Table Of Contents
Table of Contents Table of Contents DN1125 IP Box Camera 1. Introduction 2. Product Description 3. Installation & Configuration 3.1. Package Contents 3.2. Basic Connection 3.3. Functions 3.4. Lens Installation 3.4.1. Installing a C/CS Mounting lens 3.4.2. Installing an Auto IRIS lens 3.5. -
Page 3: Introduction
1. Introduction DN1125 is based on Dante Security’s DN9131 encoder module. It compresses video, audio, data and transmits the compressed video, audio, data through the network in real time. DN1125 provides a high quality video image with a limited bandwidth and storage capacity. -
Page 4: Product Description
2. Product Description Product Specifications DN1125 2.1. Function Specifications Image Sensor: 1/3” SONY Super HAD CCD; SS-HQ1 Chipset Effective Pixels: 768 x 494 (NTSC) / 795 x 596 (PAL) Super High Resolution: 550TVL Minimum Illumination: Color 0.3LUX/F1.2/ 0.002LUX/F1.2 B/W S/N Ratio: >... -
Page 5: Installation & Configuration
3. Installation & Configuration 3.1. Package Contents The Package contains the following. Please make sure all listed items are included in the box. DN1125 ------- --- - -------- --- --- ---- -- ----- --- --- ---- -- 1 1 2 V DC A d a p t o r - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 LAN Cabl e (Cross Type 1.5m) ------------------------1 10 Pin Terminal Block ---------------------------------1 Mount ri ng for l ens ----- ---- ---- --- ------ ---- ---- ---- -1... -
Page 6: Functions
3.3. Functions LOOP OUT RESET RS-232 AUDIO Tx Rx C Out In Rear panel view Micro SD ETHERNET Bottom view Figure 2. DN1125... - Page 7 Video Output BNC video output port Reset Switch (Reset) Reset switch is used for restarting DN1125 or resetting DN1125 as Factory Default (FD). Refer to ‘4.1. Factory Default Settings’ for detailed procedures. USB connector USB connector is used for connecting the USB device with DN1125. 10 pin terminal block for D/I, D/O and serial communication –...
- Page 8 D/O – Alarm Output DN1125 provides 1 channel D/O (Alarm Output). It may be connected to either voltage type sensor or relay type sensor as following Figure 6. Figure 6. Digital Output Connection Please pay attention to electric characteristics during installation. RS-232C –...
- Page 9 Power Adaptor Connector (12VDC) DN1125 employs a 12VDC power supply. Figure 9. Power Terminal Micro SD Card socket DN1125 features a memory card slot for external storage. LAN Connector (Ethernet) This is a RJ-45 LAN connector for 10/100 Base-T Ethernet. Status LED Network LED Figure 10.
-
Page 10: Lens Installation
Adaptor for mounting the camera Mounting adapter is provided on the bottom of the camera for mounting the camera on a bracket or tripod. Adapter is designed to accept standard size mounting screws. It may be unfastened and the mounted onto the top side of the camera, depending on User application. -
Page 11: Serial Number / Mac Address
3.5. Serial Number / MAC Address Serial number and MAC address is attached on the bottom of DN1125 as shown in Figure 4. MAC Address 710030FFD MAC 00:13:23:03:0F:FD DN1125 P140101010000 - 14001 Serial Number Figure 4. Serial Number / MAC Address... -
Page 12: Operation Description
4. Operation Description 4.1. Factory Default Settings Factory default settings are set as follows: • IP address: 192.168.xx.yy (refer to 2.3 Serial Number / MAC Address) • Mask: 255.255.0.0 • Gateway: 192.168.0.1 • User ID: root • Password: pass xx yy xx yy MAC address = 00-13-23-01-23-45 →... -
Page 13: Power Over Ethernet (Poe)
5. Power over Ethernet (PoE) The PoE feature employed in DN1125 is available in models DN1125A4 and DN1125B4. The standard units for power via 12VDC are models DN1125A1 and DN1125B1. For the detailed information, please see Data Sheet on Series DN1125 IP Box Cameras. -
Page 14: Electrical Characteristics
6. Electrical Characteristics 6.1. Operating conditions Parameters Typical Units Audio input range 0.01 2.593 Vp-p Ambient Operating Temperature ºC Ambient Operating Humidity Table 3. Operating conditions 6.2. Power consumption DN1125 Input Voltage 12VDC Current 120-240VAC Consumption 240mA Table 4. Power consumption Overvoltage and overcurrent will cause a severe damage to the device or even a fire. -
Page 15: Dimensions
7. Dimensions (Unit: mm) Revision history MANUAL# DATE(M/D/Y) COMMENTS D1A.01 02/09/09 Created D1A.02 02/11/09 Review and correct the error data...
Need help?
Do you have a question about the DN1125A1 and is the answer not in the manual?
Questions and answers