Related Manuals for Dante DLI1972
Summary of Contents for Dante DLI1972
- Page 1 DLI1972 Mini PTZ Dome Installation and Operations Manual Model Number: DLI1972 Description: 1/3”, Mini PTZ Dome Day/Night 10X Optical / 12X Digital Zoom...
- Page 2 DLI1972 10x Optical 12x Digital Zoom Mini High Speed Dome Installation and Operation Manual...
-
Page 3: Table Of Contents
TABLE OF CONTENT 1. Precaution----------------------- --------------- --------------------------------------------- 1 2. Installation instruction--------------------------------------------------------------------------2 2.1 Ceiling mount---------------------------------------------------------------------- 2 2.2 Wall mount--------------------------------------------------------------------------3 3. Dome performance-------------------------------------- ------- ------------------------------5 3.1 Dome parameter--------------- ------------------------------- ----------------------5 3.2 Camera parameter----------- ------------------------------------- ------------------------5 3.3 Dome performance and feature----------- --------------------- -------------------------6 4. - Page 4 7. Function setting-------------- -------------------------- ----------- ------- ------------------26 7.1 Preset -------- ------------- ------------------- ------- ------- ------ ---------------------- 26 7.2 Scan------------- --------------- ------- ------- ------ ------- -------------------------------27 7.3 Pattern------------------------------------------------------- -----------------------------28 7.4 Tour------------------------------------------------------- -------------------------------- 29 7.5 Zone -------- ------------------------------------------------------- -----------------------30 --------------------------------------------------------- --------------------31 Time running 8.
-
Page 5: Precaution
Precaution 1. Precaution Please read the manual and product label carefully before installing the speed dome. NOTICE Ø The product installation and use of the product must comply with the relevant laws of the country. Ø Electrical safety 1. Strictly conform to country and local electrical safety standard when using or installing the product. 2. -
Page 6: Installation Instruction
Installation instruction 1. 2 Item number corresponding sheet 2. Installation of product (1) Get the products out from the packages. As picture 2.1-2. Picture Mount Place Ceiling Indoor only Indoor and Wall outdoor 1. 3 Details of relevant parts Picture 2.1-2 1. -
Page 7: Wall Mount
Installation instruction (3) Insert three screws in the mini dome into the apertures on the base board(pls refer to ), then 2.2 Wall mount turn 15 degrees in clockwise(pls refer to ). 1. Dimension of product as picture below Picture 2.1-4 Picture 2.2-1 (4) Using 3 additional M3*5 screws to lock tightly. - Page 8 Installation instruction (2) Make the wall bracket as the model on installation wall, and draw the central position of the drill hole. (As picture 2.2-3) Picture 2.2-5 Picture 2.2-3 (5) Pls make the wall bracket aims at the M8 screw, so that the output cable will be locked in the hole of motherboard bracket, and use the M8 screw to lock (3) Please drill four installation holes for M8...
-
Page 9: Dome Performance
Dome performance 3. Dome performance 3. 1 Dome parameter Setting Power supply Power supply DC12V 2400/4800/9600/19200bps Baud rate RS485 Consumption Communication Protocol ID setting 0-255 Operational Decoder Physical Built-in Pan rotation Operation temperature 0 95%(no condensation) Tilt rotation Tilt90 with auto-flip Environmental humidity Pan 0.5 - 160 /S Mount way... -
Page 10: Dome Performance And Feature
Dome performance 3. 3 Dome performance and features This product is high-technology surveillance product with high definition and color camera, variable-speed pan/tilt and multifunction decoder. It can reduce the connection and installation process between systematic parts at a max limit, and also can improve the stability and reliability of the system. Meanwhile it is easy to install and repair, and it has the following advantages: beautiful shape, rotate lightly and neatly, little noise, simple operation and so on. -
Page 11: Function Instruction
Function instruction 4. Function instruction This paragraph mainly describes the main function and general principle of integrated speed dome, and does not refer to the concrete operation methods. Different system has different operation methods, generally we should operate according to the system manufactory's operation manual. Please contact dealer to get necessary information, under some conditions there are have some particular requirements and operations. -
Page 12: Monitor Function
Function instruction (3) Iris control System defaults as auto Iris. Camera can rapidly adjust size of Iris, through automatically induct the changing of environment ray, and thus make the brightness of deferent image stable. User may adjust Iris by controller keyboard open/close to get required brightness that you need. -
Page 13: System Setting
System setting 5. System setting 5. 1 Basic operation 5. 1. 1 Self-testing The dome conducts self-testing after current-carrying,and it rotates slowly until displaying pan origin that is default setting, then moving to tilt origin, the lens will be pulled far to near and near to far, when self-testing is finished, there is relevant system information displaying on the screen, as follow: S/N 4JKAA7824000058 S/N 4JKAA7824000058... -
Page 14: Edit Dome Label
System setting 5. 2 Edit dome label MAIN MENU When using a lot of systems of the dome , in order to identify each dome, SYSTEM SETTING CAMERA SETTING the systems support title setting. The setting ways as follow: FUNCTION SETTING WINDOW BLANKING The system enters into the main menu by calling 95 preset or by calling EXIT... - Page 15 System setting 5. 3 Initial information MAIN MENU SYSTEM SETTING The system enters into the main menu by calling 95 preset or by calling 9 preset CAMERA SETTING twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING EXIT Operate joystick move the cursor to SYSTEM SETTING , press OPEN to enter submenu.
-
Page 16: Display Setup
System setting 5. 4 Display setup MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 preset SYSTEM SETTING twice within 3 seconds. CAMERA SETTING FUNCTION SETTING WINDOW BLANKING Operate joystick and move the cursor to SYSTEM SETTING , press OPEN EXIT... -
Page 17: Systematic Motion Control
System setting 5. 5 System motion control MAIN MENU " System motion can set a series of canonical movement, which plays an " SYSTEM SETTING important role in controlling the image of the dome. CAMERA SETTING FUNCTION SETTING . The system enters into the main menu by calling 95 preset or by calling 9 preset WINDOW BLANKING twice within 3 seconds. -
Page 18: Park Action
System setting 5. 5. 3 Park action This setting allows the dome to run an appointed action after it enters vacancy MOTION for a few time (1-240minutes). If default sets as 0, it means not to run this action. AUTO FLIP PROPORTION PAN ON 1. -
Page 19: Clear
System setting 5. 6 Clear MAIN MENU The system enters into the main menu by calling 95 preset or by calling9 preset SYSTEM SETTING twice within 3 seconds. CAMERA SETTING FUNCTION SETTING WINDOW BLANKING Operate joystick and move the cursor to SYSTEM SETTING press OPEN EXIT... -
Page 20: Password Setting
System setting 5. 7 Password Setting MAIN MENU Password setting is the built-in function of high speed dome. Setting password SYSTEM SETTING CAMERA SETTING (6 figures) is very useful to protect the dome setting. If you do not have password, FUNCTION SETTING you can't enter the setting menu. -
Page 21: Clock Setting
System setting 5. 8 Clock setting MAIN MENU 1. The system enters into the main menu by calling 95 preset or by calling 9 preset SYSTEM SETTING CAMERA SETTING twice within 3 second. FUNCTION SETTING WINDOW BLANKING Operate joystick and m ove the cursor to System setting , press OPEN to EXIT... -
Page 22: Comm Setting
System setting 5. 9 COMM Setting MAIN MENU SYSTEM SETTING 1. The system enters into the main menu by calling 95 preset or by calling 9 preset CAMERA SETTING twice within 3 second. FUNCTION SETTING WINDOW BLANKING EXIT Operate joystick move the cursor to SYSTEM SETTING , and pressing OPEN to enter into the next menu. -
Page 23: Camera Setting
Camera setting 6. Camera setting MAIN MENU 6. 1 Zoom speed SYSTEM SETTING 1. The system enters into the main menu by calling 95 preset or by calling 9 preset CAMERA SETTING FUNCTION SETTING twice within 3 seconds. WINDOW BLANKING EXIT 2. -
Page 24: Digital Zoom Control
Camera setting 6. 2 Digital zoom control MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 preset twice SYSTEM SETTING within 3 seconds. CAMERA SETTING FUNCTION SETTING WINDOW BLANKING Operate joystick move the cursor to CAMERA SETTING , press OPEN EXIT... -
Page 25: Back Light Compensation
Camera setting 6. 3 Back light compensation MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 preset twice SYSTEM SETTING within 3 seconds. CAMERA SETTING FUNCTION SETTING . Operate joystick move the cursor to CAMERA SETTING to enter submenu. -
Page 26: Slow Shutter Control
Camera setting 6. 4 Slow shutter control MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 preset SYSTEM SETTING CAMERA SETTING twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING Operate joystick and move the cursor to CAMERA SETTING to enter submenu. -
Page 27: Ir Cut Filter
Camera setting 6. 5 IR cut filter MAIN MENU . The system enters into the main menu by calling 95 preset or by calling 9 preset SYSTEM SETTING CAMERA SETTING twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING . Operate joystick and move the cursor to CAMERA SETTING toenter submenu. -
Page 28: Advanced Setting
Camera setting 6. 6 Advanced setting MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 preset SYSTEM SETTING twice within 3 seconds. CAMERA SETTING FUNCTION SETTING Operate joystick move the cursor to CAMERA SETTING to enter submenu. -
Page 29: White Balance Mode
Camera setting 6. 6. 2 White balance mode MAIN MENU System supports AUTO ,indoor mode INDOOR , outdoor mode OUTDOOR , SYSTEM SETTING auto track mode ATW , single mode OPW , mode, manual mode CAMERA SETTING FUNCTION SETTING MANUAL and kinds of white balance modes, etc. -
Page 30: Function Setting
Function instruction 7. Function setting 7. 1 Preset The system enters into the main menu by calling 95 preset or by calling 9 preset MAIN MENU twice within 3 seconds. Click each command to enter preset menu according to SYSTEM SETTING the order of the left picture. -
Page 31: Scan
Function instruction 7. 2 Scan MAIN MENU Scan is preset two points at first, then the camera repeatedly scan between SYSTEM SETTING these two points at a stable speed, the same magnification and pan. Each dome only CAMERA SETTING has four scan. FUNCTION SETTING WINDOW BLANKING The system enters into the main menu by calling 95 preset or by calling 9 preset... -
Page 32: Pattern
Function instruction 7. 3 Pattern MAIN MENU Pattern is built-in function in camera; the speed dome can record tracks that are SYSTEM SETTING not less than 180s. (A series of pan/tilt controlling and lens controlling command). CAMERA SETTING A dome may set up to 4 pattern tours. FUNCTION SETTING The system enters into the main menu by calling 95 preset or by calling 9 preset WINDOW BLANKING... -
Page 33: Tour
Function instruction 7. 4 Tour MAIN MENU Tour is the built-in function in the speed dome, it will arrange the presets into SYSTEM SETTING the queue of auto-tour, and can set how long it will park at preset. Operate auto-tour CAMERA SETTING is a process of incessantly transfer each preset. -
Page 34: Zone
Function instruction 7. 5 Zone MAIN MENU Each dome can set 8 zones in total; the regional scene can't be overlapped. SYSTEM SETTING User will set label for each zone. When setting ZONE LABEL as ON, the dome CAMERA SETTING will display zone label when it runs to each zone. -
Page 35: Time Running
Function instruction 7. 6 Time running MAIN MENU The system enters into the main menu by calling 95 preset or by calling 9 preset SYSTEM SETTING CAMERA SETTING twice within 3 seconds. FUNCTION SETTING WINDOW BLANKING 2. Operate joystick move the cursor to FUNCTION SETTING , press OPEN EXIT to call the submenu. -
Page 36: Privacy Zone Masking
Privacy zone masking 8. Privacy zone masking MAIN MENU Privacy function can show someone piece of regional shielding while protecting. SYSTEM SETTING For example, protect the window of bedroom or ATM of bank. A dome can set up to CAMERA SETTING 24 privacy windows.(Masking setting function is relative with the model of camera FUNCTION SETTING module. -
Page 37: Appendix
Appendix 9. Appendix 9.1 Dome menu index MAIN MENU SYSTEM SETTING CAMERA SETTING FUNCTION SETTING WINDOW BLANKING EXIT CAMERA SETTING SYSTEM SETTING FUNCTION SETTING WINDOW BLANKING PRESETS E D I T D O M E L A B E L Z O O M S P E E D H I G H WINDOW NUMBER 01... -
Page 38: Trouble Shooting
Appendix 9. 2 Simple troubleshooting Possible causes Solution Trouble Power supply is damage or power Replace consumption is not enough No action, no video after Correct Power line connect wrongly power up Engineering line is malfunction Check and repair Refer to switch setting, reset the switch The dome DIP switch setting is incorrect Self-testing and Check RS485connection, confirm... -
Page 39: Rs485 Bus Basic Knowledge
Appendix 9. 4 RS-485 Bus basic knowledge Ø Characteristics of RS485 Bus As specified by RS485 standard, RS485 Bus is of half-duplexed data transmission cables with A+ B- characteristic impedance as 120 . The maximum load capacity is 32 unit loads(including main controller and controller equipment) Picture 9-4.2 Ø... - Page 40 Appendix Ø Problems in practical connection In such circumstances the factory recommends In some circumstances user adopts a star configura- the usages of RS485 distributor. The distributor can tion in practical connection. The termination resistors change the star configuration connection to the mode must be connected to the two equipment 1# and 5# in of connection stipulated in the RS485 standards.
-
Page 41: Maintenance Service Terms
, please contact us in order to speed up the process. And our company only undertake the one-way freight from manufacturer to customer after maintenance. DO NOT RETURN TO FACTORY WITHOUT RECEIVING AUTHORIZED RMA For Returns please contact Dante Security Inc. Tel: 1-347-200-5107 1150 Broadway, Ste210, Hewlett, NY 11557, USA support@dantesecurity.net...
Need help?
Do you have a question about the DLI1972 and is the answer not in the manual?
Questions and answers