Operation En; Maintenance And Care; Transport En; Storage En - Kärcher BP 2 Garden Quick Start Manual

Operation
Description of the Appliance
1 Connection adapter for pumps G1
2 Stopper
3 Connection G1 (33.3 mm) suction pipe (inlet)
4 Connection G1 (33.3 mm) delivery line (output)
5 ON/OFF switch
6 Cable clip
7 Power cord with plug
8 Suction hose set* incl. 3.5 m ready for connection,
vacuum-proof spiral hose with suction filter and
backflow stop
* Included in the scope of delivery with sets only.
Preparing the Appliance
 Remove the plug.
Illustration
 Screw the connection adapter in the suction con-
nection of the pump (inlet).
Tighten manually.
 Connect the vacuum-proof suction hose.
Note
Depending on the degree of soiling of the fluid to be de-
livered, use a pre-filter (see accessories).
Note
In order to reduce the time required for suction to start
again, use a suction hose that is equipped with a back-
flow stop. This prevents the emptying of the suction
hose after use (see accessories).
Illustration
 Fill the pump with water via the delivery connection
until it is overflowing.
Illustration
 Screw the connection adapter in the delivery con-
nection of the pump (outlet).
Tighten manually.
 Connect delivery line.
Operation
 Insert the mains plug into the socket.
 Switch on the appliance using the ON/OFF switch.
Illustration
 In order to reduce the suction time, lift the delivery
hose approx. 1m.
 Wait till the pump sucks in and transports water uni-
formly
Note
The ON/OFF switch can also be conveniently operated
with your foot.
CAUTION
Dry running damages the pump.
 Do not leave the pump unattended during opera-
tion.
Note
The pump BP4 Garden Set is equipped
with a thermo switch, which automati-
cally switches off the pump in case of
overheating. As soon as the water in-
side the appliance has cooled down, the
appliance automatically switches back
on and can be used again.
Finish operation
 Switch off the appliance using the On/Off switch.
 Disconnect the main plug from the socket.

Maintenance and Care

DANGER
Turn off the appliance and remove the mains plug prior
to any care and maintenance work.
 Rinse the pump after every use if you use to trans-
port water with additives.
Maintenance
The appliance is maintenance free.
Transport
CAUTION
In order to prevent accidents or injuries, keep in mind
the weight of the appliance during transport (see Spec-
ifications).
When transporting by hand
 Lift appliance by the carrying handle and carry it.
CAUTION
Tripping hazard due to loose cables!
 Coil cable and secure it by means of a cable clip.
When transporting in vehicles
 Secure the appliance against shifting and tipping
over.
CAUTION
In order to prevent accidents or injuries, keep in mind
the weight of the appliance when selecting a storage lo-
cation for it (see Specifications).
Storing the Appliance
 Depressurise the appliance by opening the water
outlet connected on the delivery side (e.g. opening
the tap).
 Drain hoses.
 Remove suction pipe and delivery line.
 Drain the pump via the connections suction / and
delivery line by turning it around.
 Store the appliance in a frost free area.
4
Care
Storage