Table of Contents
Advertisement
SCP-PRL783-012-03H
Attach the Frame-Ground Wire
1
Open the Telco Access door.
2
Insert the FGND wire through one of the holes in the left-hand rubber grommet. A 10 AWG (25.8 mm) solid
copper ground wire is recommended.
Frame ground wire
3
Loosen and remove the top nut and three flat washers from the ground-binding post. Loop the FGND wire
around the ground-binding post. Then replace and tighten in reverse order the hardware removed earlier.
PG-Plus PRL-783
Figure 6. Attaching the Frame-Ground Wire
January 6, 2003
Ground -binding post
Installation and Test
9
Advertisement
Table of Contents
