Table of Contents
Advertisement
SCP-PRL783-012-03H
O
RT H
PEN THE
You have full access to the interior of the RT and to each Line Module by loosening the Telco override screw from
the Customer Access door, or by loosening the tamper-proof screw from the Telco Access door. The tamper-proof
screw can be either of the following:
•
No. 8 pan-head pin and socket type, which requires a 5/32-inch drilled hex key. The No. 8 pan-head pin and
socket type screw is preferred for improved security.
•
3/8-inch hex-head screw, which requires a 3/8-inch nut driver (216 tool or can wrench).
In either case, to gain access to the interior of the RT and to each Line Module, use a 5/32-inch drilled hex key to
loosen and then remove the Telco override screw from the Customer Access or Telco Access door.
PG-Plus PRL-783
OUSING
January 6, 2003
Installation and Test
5
Advertisement
Table of Contents
