Specifications - ADC PRL-783 Manual

Product Overview
S
PECIFICATIONS
Power
HDSL Line Input Voltage
HDSL Line Start-up Voltage
PRL-783 Input Power
HDSL
Line Code
Line Rate
Reach
Environment
Temperature
Humidity
Altitude
Vibration
Electrostatic Discharge
Power and Lightning
Human Safety
Emissions Radiation and Immunity
EBS Interface
Analog Impedance
Supported Subscriber Drop
Open Circuit Voltage (no phone)
8 kHz Transmit Level
8 kHz Receive Level
Maximum Phone Current
Minimum Phone Detection Current
Voice Transmission Loss (each direction) 4 dB +2 dB
Connectors
HDSL
EBS
Dimensions
Height
Width
Depth
Weight
2
+135 Vdc (Tip to Ring, typical)
200 Vdc (Tip to Ring, minimum)
12.5 Watts (Tip to Ring, maximum)
2B1Q
130.6 K symbols/sec; 261.3 Kb/sec
15.0 kft, 26 AWG; 21.7 kft, 24 AWG; 31.2 kft, 22 AWG
-40°F to +149°F; -40°C to + 65°C
5 percent to 95 percent noncondensing
-200 ft. to 13,000 ft.; -60 m to 4,000 m
NEBS
Per GR-1089-CORE
Per GR-1089-CORE
Per UL 1950
Per FCC Part 15 for Class B digital devices
900 Ω
200 Ω with up to 4 dB of loss @ 8 kHz for up to 38 mA phone current (low level)
700 Ω with up to 14 dB of loss @ 8 kHz for up to 20 mA phone current (high
level)
36 Vdc Typical
600 mV (high level); 250 mV
pp
>50 mV
pp
38 mA for 200 Ω loop, 20 mA for 700
4.5 mA
3-terminal station protector, 3/8-inch hex nut
Screw Terminals on RJ-11 line interface
10.25 in. (26.0 cm.)
8.5 in. (21.6 cm.)
4.75 in. (12.1 cm.)
4.0 lbs. (1.81 kg.)
January 6, 2003
(low level)
pp
Ω loop
SCP-PRL783-012-03H
PG-Plus PRL-783