Reference Label - ADC PRL-783 Manual

Installation and Test

Reference Label

During installation, refer to the RT Reference label (see
middle section of the Reference label identifies the Frame Ground and HDSL Tip and Ring wires, and the wire
color code for the four lines.
8
Figure
4 EBS REMOTE TERMINAL
CONNECTION TIP / RING
EBS-4 (LINE 4)
EBS-3 (LINE 3)
EBS-2 (LINE 2)
EBS-1 (LINE 1)
HDSL
FGND
INPUT:260VDC 0.1AMP
THIS DEVICE COMPLIES WITH PART
15 OF THE FCC RULES. OPERATION
U L
IS SUBJECT TO THE FOLLOWING TWO
C US
CONDITIONS: (1) THIS DEVICE MAY
R
NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT
LISTED
ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY
I.T.E.
CAUSE UNDESIRED OPERATION.
E186258
CAUTION
RISK OF ELECTRICAL SHOCK,VOLTAGES
UP TO 280 VDC MAY BE PRESENT
ON TELECOMMUNICATIONS CIRCUITS.
WARNING
CONNECT FRAME GROUND TO EARTH GROUND,
FAILURE TO DO SO MAY RESULT IN DAMAGE TO
THE UNIT AND RISK OF ELECTRICAL SHOCK.
Figure 5. Reference Label
January 6, 2003
5) affixed inside the Customer Access door. The
PG-Plus
WHT/BRN
WHT/GRN
WHT/ORG
WHT/BLU
BLK/YEL
GREEN
SCP-PRL783-012-03H
PG-Plus PRL-783