Power Supply Led Indicators - Cisco 5000 Series Hardware Installation Manual

Appendix B Technical Specifications
S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
Table B-10
Description
PSU Control Interface
ROHS Compliant
Size (W x H x D)
Cubic Inches
Power Density
Operating Temperature
Cooling
Input connector
Output connector
Hot plug capable
Supply Indicators
RoHS Compliance
Hot swappable
Heat Dissipation

Power Supply LED Indicators

Table B-11
5500 Platform switches and the Cisco Nexus 5000 Series switches.
Table B-11
Condition
No AC power to the power supplies
Power supply failure (includes over
voltage, overcurrent, overtemperature,
and fan failure)
Power supply warning events where
the power supply continues to operate
(high temperature, high power, and
slow fan)
AC present / 3.3 voltage standby
(VSB) on, and power supply unit off
Power supply On and OK
OL-15902-01
Specifications for the Cisco Nexus 5010 Power Supply (continued)
lists the LED indicators for the LED on the front of the power supply for the Cisco Nexus
Power Supply LED Indicators
Specification
I2 C
Yes
2.75 in. x 1.57 in. x 13.7 in.
59
9.3 W per cubic inch
0 °C to 50 °C
Internal fans to cool the supply
AC connector in the chassis
DC output connector in the back
Yes
Supply Health: Green indicates the power supply is good
and Amber indicates a fault.
AC good indicator: Green indicates that AC is present
and is within the power supply specifications
Yes
Yes
1536 BTU/hr
Power LED Status (Green)
Off
Off
Off
Blinking
On
Cisco Nexus 5000 Series Hardware Installation Guide
Power Specifications
Fail LED Status (Amber)
Off
On
Blinking
Off
Off
B-5