Removing and Installing Components
Figure 3-11
Installing an Expansion Module in the Cisco Nexus 5000 Series Chassis
To install an expansion module in the Cisco Nexus5000 Series chassis, follow these steps:
Grasp the handle of the module and place your other hand under the module to support it.
Step 1
Gently slide the module into the opening until you cannot push it any further.
Step 2
Tighten the captive screw on the front of the module.
Step 3
Figure 3-11
Cisco Nexus 5000 Series Hardware Installation Guide
3-24
S e n d c o m m e n t s t o n 5 k d o c s @ c i s c o . c o m
Positioning the Module in the Cisco Nexus 5548 Chassis
shows the positioning of an expansion module in the Cisco Nexus 5020 chassis.
Chapter 3
Installing the Cisco Nexus 5500 Platform or 5000 Series Switch
OL-15902-01