TABLE OF CONTENTS Appliance Safety Important Safeguards Disposal Location of Parts Installation Instructions 10-17 Before Using Your Appliance Installation of Your Appliance 10-12 Connecting to the Water Supply Electrical Connection Reversing the Door Swing of Your Appliance 13-14 Adjusting the Height of the Unit Adjusting the Kick-plate Installing the Stainless Steel Handle Full Overlay Panel Installation Instructions...
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others.
Page 4
R600a Warning: Risk of Fire / Flammable Materials. • This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect.
Page 5
Choose a well-ventilated area with temperatures above 44°F (7°C) and below 90°F (32°C). • The appliance should not be located next to ovens, grills, or other sources of high heat. • The appliance must be installed with all electrical, water, and drain connections in accordance with state and local codes.
DISPOSAL Dispose of your appliance packaging properly. Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Refrigeration equipment must be properly disposed of in a professional and appropriate way, in accordance with the current local regulations and laws which protect the environment.
LOCATION OF PARTS Refrigerators ALR15BSS / FF1532BSS / AL54PNR / FF64BSS / SPR627OSPNR / DBAR1526 / DBAR1522 / DBAR2421ADA / DBAR2427 / DBAROS2429 LED Light Door Digital Control Panel Shelves (3) Handle Security Lock Ventilation Grille Door Racks (2) Adjustable Legs...
Page 8
Refrigerator SCR610BLSD / DBAR2430 LED Light Digital Control Panel Shelves (3) Handle Security Lock Ventilation Grille Door Adjustable Legs Refrigerators ASDS1523 / SDHR1534 / ASDS2413 / SDHR2444 /DBAR1523ASD / DBAR1525SD / DBAR2424ASD / DBAR2426SD Door Handle Shelves (3) LED Light Digital Control Security Panel...
Page 9
Refrigerator/Freezers FFRF24SS / FFRF3070BPNR / DBFDRF2497 / DBFDRF3098 Digital Control Panel LED Light Door Racks (2) (*) Handle Left Zone Right Zone (Freezer) (Refrigerator) Wire Shelves (3) Glass Shelves (3) Security Lock Door Adjustable Legs Ventilation Grille (*) Only available for certain models.
INSTALLATION INSTRUCTIONS Before Using your Appliance Remove the exterior and interior packing. • CAUTION: After unpacking you MUST allow this appliance to stand upright for at least 2 hours to allow the lubricant and refrigerant to drain back into the compressor and stabilize.
Page 11
FF64BSS. 4. Models ALFZ53, LFZ24A, SCFF53BSSADA, ALFZ53IM, DBAR2421ADA, DBFZ2451ADA and DBFZIM2452ADA have the same size as AL54PNR. 5. Model DBAR1523ASD has the same size as ASDS1523. 6. Model DBAR1525SD has the same size as SDHR1534.
Securing the Appliance (If available) Pop out the cover cap on the opposite side of hinge and secure the appliance in the niche by tightening the screws through the attachment bracket if the unit is provided with an attachment bracket. Connecting to the Water Supply WARNING Improper water line connection may result in flooding.
NOTE: All parts removed must be saved to allow the door swing to be reversed. NOTE: Some variations of these items may only be reversible in Summit facilities before being shipped. Consult our website for more information.
WARNING Use extreme caution with the articulated hinges. The hinge is self-closing, and many pinch points exist prior to built-in installation. 1. Remove the cover caps (3) and then remove the door by unscrewing the four screws (1) and (2). Be careful to hold the door firmly after removing the screws and place it on a padded surface to avoid the risk of damage.
Installing a Stainless Steel Handle This appliance includes a stainless steel handle that is not required to operate the unit. To install the handle, follow the instructions below: Place the handle (1) over the mounting stub (3) of the door and using the supplied Allen key, tighten the securing grub screws (2) to affix the handle.
Included in the Bracket Kit ① ⑨ ② ④ Phillips self-tapping Bottom bracket (1) Top brackets (1) Phillips self-tapping screw (6) screw (4) Door Panel Installation Method 1: (With included brackets) This method is designed to be an easily convenient installation method and does not require drilling into the unit’s door.
Page 17
5. To prepare the unit for panel installation, remove the lock bracket (8) and magnetic activator (5) from the bottom of the door and remove the magnetic activator (5) & hole plugs (6) from the top of the door. This is done by removing the screws that attach the lock bracket and magnetic activators to the door.
OPERATING YOUR APPLIANCE It is recommended you install the appliance in a place where the ambient temperature is between 44ºF and 90ºF (7ºC to 32ºC). If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate.
Page 19
Control Panel for Refrigerator ON/OFF Power To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, press and hold the key for 1 second until the temperature display lights up.
Page 20
Control Panel for Refrigerators ON/OFF Power To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, press and hold the key for 1 second until the temperature display lights up.
Control Panel for Freezer ON/OFF Power To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, press and hold the key for 1 second until the temperature display lights up.
Control Panel for Freezers ON/OFF Power To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, press and hold the key for 1 second until the temperature display lights up.
Control Panel for Refrigerator/Freezer ON/OFF POWER To turn the appliance off, lightly touch and hold the key for 5 seconds until temperature display goes out. To turn the appliance on, lightly touch and hold the key for 1 second until temperature display lights up.
• The temperature you are setting will increase by one degree each time you touch the UP symbol and will decrease by one degree each time you touch the DOWN symbol. The display flashes while you make the setting. • The set temperature will temporarily flash in the display for 5 seconds after the temperature has been set.
• F2: DynaClima mode - full time 3. Touch and hold the UP key for 5 seconds to confirm the selection. Audible Tones 1. Lightly touch and hold the UP key for 5 seconds to enter Settings mode and then touch the POWER key four (4) times.
Defrosting • The unit defrosts automatically in normal operating conditions. • The evaporator behind the rear wall of the unit defrosts automatically. The condensate collects in the drainage channel behind the rear wall of the unit and flows through the drainage hole into the drip tray by/above the compressor where it evaporates.
Shelves (Only for Models FF1532BSS / SCFF1533BSS / AL54PNR / FF64BSS / SCFF53BSS / FFRF24SS.) To prevent damaging the door gasket, make sure to have the door all the way open when pulling the shelves out of the rail compartment.
CARE AND MAINTENANCE Cleaning your Appliance Turn off the power, unplug the appliance, and remove all items, including shelves. • Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of • baking soda to a quart of water). Wash the shelves with a mild detergent solution.
TROUBLESHOOTING You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. PROBLEM POSSIBLE CAUSE REMEDY Appliance is not connected to a power Connect the appliance.
Page 30
The racks or bins are out of position. Check the racks and bins and refit correctly. “E0” indicates a communication error for 3 Call for service. zone models. Display “E0”, “E1” or “E2” indicates that the air “E1”. “E2”, temperature sensor has failed. “E3”, “E4”, “E3”...
Page 31
NOTES CALIFORNIA CARB/SNAP DISCLOSURE This product uses eco-friendly hydrocarbon refrigerant and fully complies with California CARB regulations. However, we are required by California Law to provide the following disclosure statement in every product sold in California. "This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited Substances' for that specific end-use, in accordance with California Code of Regulations, title 17, section 95374.
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company.
Need help?
Do you have a question about the AL54PNR and is the answer not in the manual?
Questions and answers