AEG BEB352010M User Manual page 34

34 www.aeg.com
Step 3
Step 4
11.4 How to use: Aqua
Cleaning
This cleaning procedure uses humidity to
help remove remaining fat and food
particles from the oven.
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
Step 4
Step 5
11.6 How to remove and
install: Door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
Pour water into the cavity em-
bossment: 200 ml.
Set the function:
Set the temperature to 90 °C.
Turn off the oven and wait until
it is cold to clean it.
Remove the shelf supports.
Grab the grill corners. Pull it for-
wards against the spring pres-
sure and out of two holders.
The grill folds down.
Clean the oven ceiling with
warm water, a soft cloth and a
mild detergent. Let it dry.
Install the grill in the opposite
sequence.
Install the shelf supports.
1
Step 4
Step 5
Step 6
11.5 How to remove: Grill
.
WARNING!
There is a risk of burns.
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
2
Let the oven work for 30 min.
Turn off the oven.
Wait until the oven is cold.
Dry the cavity with a soft
cloth.