CTA PAD-2VDMB Instruction Manual

Dual VESA Security Enclosure Desk Mount
w/ Storage Compartment (Black / White)
CONTENTS:
A
x1

INSTALLATION:

1. Mounting Setup

Mounting to Direct Surface
1A. When mounting into a surface for a desk
mount mode, use (4) screws and (4) anchors as
illustrated (B) and rotate through desk mount (A).
Using a screwdriver (not provided), rotate in until
securely tightened as shown above.
PAD-2VDMB/ PAD-2VDMW
INSTRUCTION - MANUAL
B
C
x8
x4
M5 x 12
H
x4
M6 x 16
M6 Allen Key
OR
A
**Screw Driver is for
illustration purposes and
not included
B
(x4)
D
E
x8
x4
M5 Nut M5 x 8
I
J
x4
x1
**Tablet shown for
Mounting to Another
Vesa Compatible Item
888-733-4448
F G
M5 Allen Key
x1
x1
K
L
x2
Foam Adapter &
illustration and Sheet Bundle
NOT INCLUDED.
**Floor Stand is for
illustration purposes and
not included
A
I
M6 Allen key
H
(x4)
M6 x 16
J
(x4)
1B. When mounting into CTA Digital's
ADD-PARAFS2 stands, first open the back
door to the storage area. Then use the
provided allen key tool (I) and rotate in
screws (H) on top of the washers (J) as
shown until securely fastened. Shut door
and lock with key. (G)
x2