CTA PAD-2VDMWA Instruction Manual

Dual Acrylic Enclosure Desk Mount
CONTENTS:
A
x1
INSTALLATION:
1. Mounting Setup
Mounting to Direct Surface
1A. When mounting into a surface for a desk
mount mode, use (4) screws and (4) anchors as
illustrated (H) and rotate through desk mount (A).
Using a screwdriver (not provided), rotate in until
securely tightened as shown above.
w/ Storage Compartment
PAD-2VDMWA
INSTRUCTION - MANUAL
B C
x2
x8
M5 x 12
I
H
x4
x4
M6 x 16
A
**Screw Driver is for
illustration purposes and
not included
H
(x4)
D
E
x8 x4
M5 Nut M5 x 8
J K
x4
x1
M6 Allen Key
Mounting to Another
OR
Vesa Compatible Item
888-733-4448
F
G
x1
Security Star Key
M5 Allen Key
L
Flat Head
Star Screw
x4
M
Rounded Head
Star Screw
x4
**Floor Stand is for
illustration purposes and
not included
A
J
M6 Allen key
I
(x4)
M6 x 16
K
(x4)
1B. When mounting into CTA Digital's
ADD-PARAFS2 stands, first open the back
door to the storage area. Then use the
provided allen key tool (J) and rotate in
screws (I) on top of the washers (K) as
shown until securely fastened. Shut door
and lock with key. (N)
x2
N
x1